Step 30 — Then, push the PTsealer onto the threade... | Sillybutts Wildstyle

Sillybutts Wildstyle

Machines · Slicebuild

30 / 36

Manual

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Step 30 — Then, push the PTsealer onto the threade... — Figure 30

Step 30 of 36

Then, push the PTsealer onto the threaded rods and into the plunger tube. The lube at the end of the plunger tube will let the o-ring on the PTsealer slide into place.

Figure 30

← Previous Push the plunger tube into the blaster,... Next Slide the Shell Carriage onto the thread... →