Step 03 — Glue one of the Dash 016 o-rings onto th... | Sillybutts Wildstyle

Sillybutts Wildstyle

Machines · Mr Elliott Coe

03 / 10

Manual

Step 03 — Glue one of the Dash 016 o-rings onto th... — Figure 03

Step 03 of 10

Glue one of the Dash 016 o-rings onto the front of the PTsealer, inside the groove. Apply 4 dots of super glue into the groove, then place the o-ring in the groove. Hold the o-ring in place while the glue dries.

Figure 03

Printed parts

1 ptsealer

Hardware

1 29×3 O-ring
1 15.6×1.78 O-ring