For creators
Publish the project, not the zip
When geometry moves, the bill of materials and the manual should move with it. Create an account, write the steps in Studio, and publish a URL builders can share.
The zip is the problem
A dump of STLs does not tell a builder which hardware to buy, which step uses which part, or what to reprint when you revise a bracket. Slicebuild keeps those together so a release is a project, not a folder.
01
Write the manual in Studio
Create an account, add printed parts, then steps. Each step can carry instruction text, hardware, and a 3D view you restage when geometry moves.
02
Publish a URL builders can share
Publishing requires a real step. The public build page is the document: title, assembly instructions, bill of materials. The guide player is the assembly view.
03
Revise without orphaning the docs
Swap a part, update the step, republish. Builders following the public URL get the current manual instead of a stale PDF in a Discord pin.
What to put in a good manual
The same things Prusa-style kit manuals and Adafruit guides get right — without exporting a 40-page PDF.
-
One action per step
“Assemble gantry” is a chapter. “Press the heat-set into the left upright” is a step. Builders should not hunt through a paragraph for the screw in their hand.
-
Hardware on the step that uses it
M3×12, inserts, bearings. Quantities roll up into a shopping list on the public page so nobody orders twice.
-
Print notes on the STL
Walls, infill, material, orientation. If it only lives in a Reddit comment, it will be missed.
-
A figure that can move
The 3D view is the illustration. When a bracket revises, restage the step instead of reshooting a photo set.
What builders see
Search engines and humans get the same page: headings, step copy, and parts. That is the point of publishing on Slicebuild instead of only hosting files. Read how to publish instructions or the builder guide if you want the other side of the bench.
Questions
- What does Studio actually store?
- Printed parts (STLs), per-step hardware, instruction text, and a 3D view you can restage when a part revises. The public build page is generated from that same record.
- Can I keep a project private while I write it?
- Yes. Drafts are not listed. Publishing is a separate action, and you can unpublish later without deleting the files.
- Can I unpublish later?
- Yes. Unpublishing returns the project to draft: it drops off the homepage, Explore, and the sitemap. The files stay in Studio until you change them.
- Do I need to leave CAD?
- No. Designers keep their source. Slicebuild is how that design is handed to someone with a printer, a bag of fasteners, and an evening at the bench.
Have a multipart print sitting in a zip?
Makers: create an account, upload the STLs, and write the assembly instructions in Studio. Publishing puts a real manual on the public web.