Step 01 — Insert 4 x M3 x 65mm screws into the hol... | Ultimate Airsoft Catcher Target

Ultimate Airsoft Catcher Target

Airsoft · Slicebuild Work in progress

01 / 03

Manual

Step 01 — Insert 4 x M3 x 65mm screws into the hol... — Figure 01

Step 01 of 03

Insert 4 x M3 x 65mm screws into the holes in the base, if they don't quite fit, use a 3mm drill bit to drill out the hole.

Figure 01

Printed parts

1 UACT_Base_v1_x1

Hardware

4 M3×65 SHCS

Names search Amazon.